Turbo Decoder HU92 for BMW E series

$550.00

Turbo Decoder HU92 for BMW E series – Locksmith solution for fast opening and decoding of HU92 lock type.

Description

Turbo Decoder HU92 for BMW E series – Locksmith solution for fast opening and decoding of HU92 lock type.

With the new developed manufacturing technique, we bring this tool one step ahead of everything on the market. With the tool’s new opening capabilities and its new features, we aim for the new Turbo Decoder to reach broader audience and to become more available across the globe.

Turbo Decoder HU92 BMW – Made to pick all BMW E series

With Turbo Decoder HU92 BMW you will be able to open (pick the lock) and decode any lock of the type HU92 which can be found mostly on HU92, but also on other models such as Mini Cooper, Land Rover, some models of Scania etc.

Supports all E series till 2014

E60/ E61 /E 63 /E64/ E65/ E70/ E71/ E87/ E90/ E91/ E92/ E93

The tool is appropriate for Scania, Land Rover, MINI Cooper and Rolls Royce

WD-40 for Turbo Decoder

Always apply WD40 before inserting the decoders in the locks. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. With WD-40 you help the pins move inside the lock cylinder – this leads to better performance.

Three main wheels, easy to remember procedure

How to use Turbo Decoder HU92 BMW

Step 1. Reset the decoder

turn the turbo wheel to the left / back one with serial number /
open the gate wheel by pulling it back
reset the pins by pushing them down to the maximum under the gate plate, through the holes, as shown in the picture below Reset Procedure of Turbo Decoder:
close the gate wheel / push it in /
turn the turbo wheel maximum to the RIGHT
all pins must be aligned, as the picture below.
Now your Turbo Decoder is ready for the lock opening.

Step 2. Inserting Turbo Decoder HU92 BMW into the lock

Close the gate wheel / push it in /
Turn the turbo wheel to the right
Put the decoder inside the lock with a closed gate, and holding the gate wheel with points directed to the same side as the tester key pointed.1.

Step 3. Opening procedure

The most important part is how strong your tension is (on the tension wheel). If its too weak – the lock won’t open or it will open very slow. If the tension is too strong – you may break the tool or risk of tool deformation.

Turn the tension wheel to the LEFT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.
Turn the tension wheel to the RIGHT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.

Please see more Turbo Decoders here.

IMPORTANT !!! WE SELL ALL DEVICES FOR OFFICIAL USE ONLY !!!
!!! THE MANUFACTURER IS NOT RESPONSIBLE FOR ILLEGAL ACTIONS BY THE BUYERS !!!

Reviews

There are no reviews yet.