Description

Turbo Decoder HU66 is used to open and decode locks for VAG Group car models – VW, AUDI, SKODA, SEAT, PORSCHE etc.

On door lock – VAG Group models from 1998 till 2004 (Skoda models up to 2014 on door lock)
On ignition (steering wheel) – VAG Group models from 1998 till 2014 – 2015
SUITABLE FOR THE IGNITION.

With the new developed manufacturing technique, we bring this tool one step ahead of everything on the market. With the tool’s new opening capabilities and its new features, we aim for the new Turbo Decoder to reach broader audience and to become more available across the globe.

Turbo Decoder HU66 VAG Group is Professional Decoder.

It is a mechanical tool that opens very fast lock type HU66 for VAG GROUP. In order to be successful with the opening, a specific procedure must be followed. Below in this description you will find General Video Instructions that show step by step the opening methodology.

Why Turbo Decoder HU66 VAG Group?

When the decoder is used according to the instructions, this can become an indispensable tool for every professional locksmith not only in the opening, but also in the decoding. After the lock is decoded, the user can make a duplicate key. Very easy to learn. Extremely durable. We test every tool for possible manufacturing mistakes. After your order is completed and the tool is dispatched (within 1-2 days usually) on your email you will receive a link with Video manual of the exact instrument (with a Serial number) you are going to purchase – This serves as a guarantee that the tool is working.

WD-40 for Turbo Decoder

Always apply WD40 before inserting the decoders in the locks. WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal parts. With WD-40 you help the pins move inside the lock cylinder – this leads to better performance.

Three main wheels, easy to remember procedure

How to use Turbo Decoder HU66 VAG Group

Step 1. Reset the decoder

turn the turbo wheel to the left / back one with serial number /
open the gate wheel by pulling it back
reset the pins by pushing them down to the maximum under the gate plate, through the holes, as shown in the picture below Reset Procedure of Turbo Decoder:
close the gate wheel / push it in /
turn the turbo wheel maximum to the RIGHT
all pins must be aligned, as the picture below.
Now your Turbo Decoder is ready for the lock opening.

Step 2. Inserting Turbo Decoder HU66 VAG Group into the lock

Close the gate wheel / push it in /
Turn the turbo wheel to the right
Put the decoder inside the lock with a closed gate, and holding the gate wheel with points directed to the same side as the tester key pointed.1.

Step 3. Opening procedure

The most important part is how strong your tension is (on the tension wheel). If its too weak – the lock won’t open or it will open very slow. If the tension is too strong – you may break the tool or risk of tool deformation.

Turn the tension wheel to the LEFT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.
Turn the tension wheel to the RIGHT (keep holding it) and then turn the turbo wheel to the left until you reach the 1st stop point (we have 1 2 3 4 stop points engraved on the the gate) and return the turbo wheel to the right in its original position.

Please see more Turbo Decoders here.

IMPORTANT !!! WE SELL ALL DEVICES FOR OFFICIAL USE ONLY !!!
!!! THE MANUFACTURER IS NOT RESPONSIBLE FOR ILLEGAL ACTIONS BY THE BUYERS !!!

Reviews

There are no reviews yet.

Turbo Decoder HU66 VAG GROUP