Toyota Emergency Start / Key Programmer

Description

We designed the device “Toyota Emergency Start / Key Programmer” to program smart keys of TOYOTA vehicles (Even if you lost all keys).

Supported models for Toyota Emergency Start / Key Programmer:

All of Toyota models equipped with KEYLESS-GO system, from 2008 till 2017

How does Toyota Emergency Start / Key Programmer works:

The device has two modes:
1. Emergency start
2. Key programming

Before beginning any of the procedures it is important to wake the car up.
You can do this by pressing the start button a few times and turning the headlights on and off.

Mode 1: Emergency start

The switches have to be as follows: 1.ON 2.OFF 3.ON 4.OFF 5.ON 6.OFF 7.ON 8.OFF
You need to plug in the device and you need to look at the LED. If Toyota Key Emulator is flashing RED, you need to press the start button with the transponder emulator.
If it is solid RED, you need to touch the start button with the transponder emulator.

Mode 2: Key programming

Switch 1 is ALWAYS ON. Then depending on the number of keys you want to program, slide the corresponding switch to the ON position (for example for 3 keys, SWITCH 3 should be set to ON).
The device needs to be plugged in and you need to look at the LED. Check if Key Programmer is flashing RED, you need to press the start button with the transponder emulator.
If it is solid RED, you need to touch the start button with the transponder emulator.
If the LED is solid GREEN, you need to touch the new key that you want to program to the start button so that it can be programmed to the car.
Usually the car makes a sound.

Please find similar device: JBL Toyota Lexus Emergency Start.

All other Car Key Programmers for sale.

IMPORTANT !!! WE SELL ALL DEVICES FOR OFFICIAL USE ONLY !!!
!!! THE MANUFACTURER IS NOT RESPONSIBLE FOR ILLEGAL ACTIONS BY THE BUYERS !!!